This plug and play harness connects to all of the following: port injection, ethanol sensor, low pressure fuel sensor, MAP, intake CAM, and crank sensor.
CAN + power splitter
The CAN + power splitter connects the harness to the Body Domain Controller in the passenger footwell behind the kick-plate.
Charge pipe extension cable
The charge pipe extension cable connects into the charge pipe MAP sensor to read higher boost pressures for those tuning with Bootmod3 or MHD on B58 Gen 1 and Gen 2 platforms. It does not fit the S58 G8X chassis; if tuning with Bootmod3 or MHD on the G8X Chassis (S58 engine), we recommend changing the TMAP sensor to a higher pressure 4 Bar sensor rather than trying to extend to the charge pipe.
Auxiliary cable pack
Four additional cables are included to simplify future expansions such as additional sensors, methanol, or NOS. These 8 ft. cables plug directly into the unused ReFlex™ harness auxiliary ports Aux Out 1/2/3 and Aux in 4 (PSI).
ReFlex Plus™ mounting bracket
The mounting bracket holds the ReFlex™ safely in place in the access compartment next to the engine bay on the passenger side.
Available with or without ReFlex Plus™ and Motiv™ 0-10 Bar Pressure Sensor
